What Houdini Means for Animating Transforms

综合技术 CSS-Tricks (源链)

I’ve been playing with CSS transforms for over five years and one thing that has always bugged me was that I couldn’t animate the components of a transform chain individually. This article is going to explain the problem, the old workaround, the new magic Houdini solution and, finally, will offer you a feast of eye candy through better looking examples than those used to illustrate concepts.

The Problem

In order to better understand the issue at hand, let’s consider the example of a box we move horizontally across the screen. This means one div as far as the HTML goes:

The CSS is also pretty straightforward. We give this box dimensions, a background and position it in the middle horizontally with a margin .

$d: 4em;

.box {
  margin: .25*$d auto;
  width: $d; height: $d;
  background: #f90;
}

See the Pen by thebabydino ( @thebabydino ) on CodePen .

Next, with the help of a translation along the x axis, we move it by half a viewport ( 50vw ) to the left (in the negative direction of the x axis, the positive one being towards the right):

transform: translate(-50vw);

See the Pen by thebabydino ( @thebabydino ) on CodePen .

Now the left half of the box is outside the screen. Decreasing the absolute amount of translation by half its edge length puts it fully within the viewport while decreasing it by anything more, let’s say a full edge length (which is $d or 100% —remember that % values in translate() functions are relative to the dimensions of the element being translated ), makes it not even touch the left edge of the viewport anymore.

transform: translate(calc(-1*(50vw - 100%)));

See the Pen by thebabydino ( @thebabydino ) on CodePen .

This is going to be our initial animation position.

We then create a set of @keyframes to move the box to the symmetrical position with respect to the initial one with no translation and reference them when setting the animation :

$t: 1.5s;

.box {
  /* same styles as before */
  animation: move $t ease-in-out infinite alternate;
}

@keyframes move {
  to { transform: translate(calc(50vw - 100%)); }
}

This all works as expected, giving us a box that moves from left to right and back:

See the Pen by thebabydino ( @thebabydino ) on CodePen .

But this is a pretty boring animation, so let’s make it more interesting. Let’s say we want the box to be scaled down to a factor of .1 when it’s in the middle and have its normal size at the two ends. We could add one more keyframe:

50% { transform: scale(.1); }

The box now also scales ( demo ), but, since we’ve added an extra keyframe, the timing function is not applied for the whole animation anymore—just for the portions in between keyframes. This makes our translation slow in the middle (at 50% ) as we now also have a keyframe there. So we need to tweak the timing function, both in the animation value and in the @keyframes . In our case, since we want to have an ease-in-out overall, we can split it into one ease-in and one ease-out .

.box {
  animation: move $t ease-in infinite alternate;
}

@keyframes move {
  50% {
    transform: scale(.1);
    animation-timing-function: ease-out;
  }
  to { transform: translate(calc(50vw - 100%)); }
}

See the Pen by thebabydino ( @thebabydino ) on CodePen .

Now all works fine, but what if we wanted different timing functions for the translation and scaling? The timing functions we’ve set mean the animation is slower at the beginning, faster in the middle and then slower again at the end. What if we wanted this to apply just to the translation, but not to the scale? What if we wanted the scaling to happen fast at the beginning, when it goes from 1 towards .1 , slow in the middle when it’s around .1 and then fast again at the end when it goes back to 1 ?

The animation timeline (
live ).

Well, it’s just not possible to set different timing functions for different transform functions in the same chain. We cannot make the translation slow and the scaling fast at the beginning or the other way around in the middle. At least, not while what we animate is the transform property and they’re part of the same transform chain.

The Old Workaround

There are of course ways of going around this issue. Traditionally, the solution has been to split the transform (and consequently, the animation ) over multiple elements. This gives us the following structure:

We move the width property on the wrapper. Since div elements are block elements by default, this will also determine the width of its .box child without us having to set it explicitly. We keep the height on the .box however, as the height of a child (the .box in this case) also determines the height of its parent (the wrapper in this case).

We also move up the margin , transform and animation properties. In addition to this, we switch back to an ease-in-out timing function for this animation . We also modify the move set of @keyframes to what it was initially, so that we get rid of the scale() .

.wrap {
  margin: .25*$d calc(50% - #{.5*$d});
  width: $d;
  transform: translate(calc(-1*(50vw - 100%)));
  animation: move $t ease-in-out infinite alternate;
}

@keyframes move {
  to { transform: translate(calc(50vw - 100%)); }
}

We create another set of @keyframes which we use for the actual .box element. This is an alternating animation of half the duration of the one producing the oscillatory motion.

.box {
  height: $d;
  background: #f90;
  animation: size .5*$t ease-out infinite alternate;
}

@keyframes size { to { transform: scale(.1); } }

We now have the result we wanted:

See the Pen by thebabydino ( @thebabydino ) on CodePen .

This is a solid workaround that doesn’t add too much extra code, not to mention the fact that, in this particular case, we don’t really need two elements, we could do with just one and one of its pseudo-elements. But if our transform chain gets longer, we have no choice but to add extra elements. And, in 2018, we can do better than that!

The Houdini Solution

Some of you may already know thatCSS variables are not animatable (and I guess anyone who didn’t just found out). If we try to use them in an animation , they just flip from one value to the other when half the time in between has elapsed.

Consider the initial example of the oscillating box (no scaling involved). Let’s say we try to animate it using a custom property --x :

.box {
  /* same styles as before */
  transform: translate(var(--x, calc(-1*(50vw - #{$d}))));
  animation: move $t ease-in-out infinite alternate
}

@keyframes move { to { --x: calc(50vw - #{$d}) } }

Sadly, this just results in a flip at 50% , the official reason being that browsers cannot know the type of the custom property (which doesn’t make sense to me, but I guess that doesn’t really matter).

See the Pen by thebabydino ( @thebabydino ) on CodePen .

But we can forget about all of this because now Houdini has entered the picture and we can register such custom properties so that we explicitly give them a type (the syntax ).

For more info on this, check out the talk and slides by Serg Hospodarets .

CSS.registerProperty({
  name: '--x', 
  syntax: '',
  initialValue: 0
});

We’ve set the initialValue to 0 , because we have to set it to something and that something has to be a computationally independent value—that is, it cannot depend on anything we can set or change in the CSS and, given the initial and final translation values depend on the box dimensions, which we set in the CSS, calc(-1*(50vw - 100%)) is not valid here. It doesn’t even work to set --x to calc(-1*(50vw - 100%)) , we need to use calc(-1*(50vw - #{$d})) instead.

$d: 4em;
$t: 1.5s;

.box {
  margin: .25*$d auto;
  width: $d; height: $d;
  --x: calc(-1*(50vw - #{$d}));
  transform: translate(var(--x));
  background: #f90;
  animation: move $t ease-in-out infinite alternate;
}

@keyframes move { to { --x: calc(50vw - #{$d}); } }
The simple oscillating box we get using the new method (
live demo , needs Houdini support).

For now, this only works in Blink browsers behind the Experimental Web Platform features flag. This can be enabled from chrome://flags (or, if you’re using Opera, opera://flags ):

The Experimental Web Platform features flag enabled in Chrome.

In all other browsers, we still see the flip at 50% .

Applying this to our oscillating and scaling demo means we introduce two custom properties we register and animate—one is the translation amount along the x axis ( --x ) and the other one is the uniform scaling factor ( --f ).

CSS.registerProperty({ /* same as before */ });

CSS.registerProperty({
  name: '--f', 
  syntax: '',
  initialValue: 1
});

The relevant CSS is as follows:

.box {
  --x: calc(-1*(50vw - #{$d}));
  transform: translate(var(--x)) scale(var(--f));
  animation: move $t ease-in-out infinite alternate, 
             size .5*$t ease-out infinite alternate;
}

@keyframes move { to { --x: calc(50vw - #{$d}); } }

@keyframes size { to { --f: .1 } }
The oscillating and scaling with the new method (
live demo , needs Houdini support).

Better Looking Stuff

A simple oscillating and scaling square isn’t the most exciting thing though, so let’s see nicer demos!

More interesting examples. Left: rotating wavy grid of cubes. Right: bouncing square.

The 3D version

Going from 2D to 3D, the square becomes a cube and, since just one cube isn’t interesting enough, let’s have a whole grid of them!

We consider the body to be our scene. In this scene, we have a 3D assembly of cubes ( .a3d ). These cubes are distributed on a grid of nr rows and nc columns:

- var nr = 13, nc = 13;
- var n = nr*nc;

.a3d
  while n--
    .cube
      - var n6hedron= 6; // cube always has 6 faces
      while n6hedron--
        .cube__face

The first thing we do is a few basic styles to create a scene with a perspective, put the whole assembly in the middle and put each cube face into its place. We won’t be going into the details of how to build a CSS cube because I’ve already dedicated a very detailed article to this topic, so if you need a recap, check that one out!

The result so far can be seen below – all the cubes stacked up in the middle of the scene:

All the cubes stacked up in the middle (
live demo ).

For all these cubes, their front half is in front of the plane of the screen and their back half is behind the plane of the screen. In the plane of the screen, we have a square section of our cube. This square is identical to the ones representing the cube faces.

See the Pen by thebabydino ( @thebabydino ) on CodePen .

Next, we set the column ( --i ) and row ( --j ) indices on groups of cubes. Initially, we set both these indices to 0 for all cubes.

.cube {
  --i: 0;
  --j: 0;
}

Since we have a number of cubes equal to the number of columns ( nc ) on every row, we then set the row index to 1 for all cubes after the first nc ones. Then, for all cubes after the first 2*nc ones, we set the row index to 2 . And so on, until we’ve covered all nr rows:

style
  | .cube:nth-child(n + #{1*nc + 1}) { --j: 1 }
  | .cube:nth-child(n + #{2*nc + 1}) { --j: 2 }
  //- and so on
  | .cube:nth-child(n + #{(nr - 1)*nc + 1}) { --j: #{nr - 1} }

We can compact this in a loop:

style
  - for(var i = 1; i < nr; i++) {
    | .cube:nth-child(n + #{i*nc + 1}) { --j: #{i} }
  -}

Afterwards, we move on to setting the column indices. For the columns, we always need to skip a number of cubes equal to nc - 1 before we encounter another cube with the same index. So, for every cube, the nc -th cube after it is going to have the same index and we’re going to have nc such groups of cubes.

(We only need to set the index to the last nc - 1 , because all cubes have the column index set to 0 initially, so we can skip the first group containing the cubes for which the column index is 0 – no need to set --i again to the same value it already has.)

style
  | .cube:nth-child(#{nc}n + 2) { --i: 1 }
  | .cube:nth-child(#{nc}n + 3) { --i: 2 }
  //- and so on
  | .cube:nth-child(#{nc}n + #{nc}) { --i: #{nc - 1} }

This, too, can be compacted in a loop:

style
  - for(var i = 1; i < nc; i++) {
    | .cube:nth-child(#{nc}n + #{i + 1}) { --i: #{i} }
  -}

Now that we have all the row and column indices set, we can distribute these cubes on a 2D grid in the plane of the screen using a 2D translate() transform, according to the illustration below, where each cube is represented by its square section in the plane of the screen and the distances are measured in between transform-origin points (which are, by default, at 50% 50% 0 , so dead in the middle of the square cube sections from the plane of the screen):

How to create a basic grid starting from the position of the top left item (
live ).
/* $l is the cube edge length */
.cube {
  /* same as before */
  --x: calc(var(--i)*#{$l});
  --y: calc(var(--j)*#{$l});
  transform: translate(var(--x), var(--y));
}

This gives us a grid, but it’s not in the middle of the screen.

The grid, having the midpoint of the top left cube in the middle of the screen (
live demo ).

Right now, it’s the central point of the top left cube that’s in the middle of the screen, as highlighted in the demo above. What we want is for the grid to be in the middle, meaning that we need to shift all cubes left and up (in the negative direction of both the x and y axes) by the horizontal and vertical differences between half the grid dimensions ( calc(.5*var(--nc)*#{$l}) and calc(.5*var(--nr)*#{$l}) , respectively) and the distances between the top left corner of the grid and the midpoint of the top left cube’s vertical cross-section in the plane of the screen (these distances are each half the cube edge, or .5*$l ).

The difference between the position of the grid midpoint and the top left item midpoint (
live ).

Subtracting these differences from the previous amounts, our code becomes:

.cube {
  /* same as before */
  --x: calc(var(--i)*#{$l} - (.5*var(--nc)*#{$l} - .5*#{$l}));
  --y: calc(var(--j)*#{$l} - (.5*var(--nr)*#{$l} - .5*#{$l}));
}

Or even better:

.cube {
  /* same as before */
  --x: calc((var(--i) - .5*(var(--nc) - 1))*#{$l}));
  --y: calc((var(--j) - .5*(var(--nr) - 1))*#{$l}));
}

We also need to make sure we set the --nc and --nr custom properties:

- var nr = 13, nc = 13;
- var n = nr*nc;

//- same as before
.a3d(style=`--nc: ${nc}; --nr: ${nr}`)
  //- same as before

This gives us a grid that’s in the middle of the viewport:

The grid is now in the middle (
live ).

We’ve also made the cube edge length $l smaller so that the grid fits within the viewport.

Alternatively, we can go for a CSS variable --l instead so that we can control the edge length depending on the number of columns and rows. The first step here is setting the maximum of the two to a --nmax variable:

- var nr = 13, nc = 13;
- var n = nr*nc;

//- same as before
.a3d(style=`--nc: ${nc}; --nr: ${nr}; --max: ${Math.max(nc, nr)}`)
  //- same as before

Then, we set the edge length ( --l ) to something like 80% (completely arbitrary value) of the minimum viewport dimension over this maximum ( --max ):

.cube {
  /* same as before */
  --l: calc(80vmin/var(--max));
}

Finally, we update the cube and face transforms, the face dimensions and margin to use --l instead of $l :

.cube {
  /* same as before */
  --l: calc(80vmin/var(--max));
  --x: calc((var(--i) - .5*(var(--nc) - 1))*var(--l));
  --y: calc((var(--j) - .5*(var(--nr) - 1))*var(--l));
	
  &__face {
    /* same as before */
    margin: calc(-.5*var(--l));
    width: var(--l); height: var(--l);
    transform: rotate3d(var(--i), var(--j), 0, calc(var(--m, 1)*#{$ba4gon})) 
               translatez(calc(.5*var(--l)));
  }
}

Now we have a nice responsive grid!

The grid is now in the middle and responsive such that it always fits within the viewport (
live ).

But it’s an ugly one, so let’s turn it into a pretty rainbow by making the color of each cube depend on its column index ( --i ):

.cube {
  /* same as before */
  color: hsl(calc(var(--i)*360/var(--nc)), 65%, 65%);
}
The rainbow grid (
live demo ).

We’ve also made the scene background dark so that we have better contrast with the now lighter cube edges.

To spice things up even further, we add a row rotation around the y axis depending on the row index ( --j ):

.cube {
  /* same as before */
  transform: rotateY(calc(var(--j)*90deg/var(--nr))) 
             translate(var(--x), var(--y));
}
The twisted grid (
live demo ).

We’ve also decreased the cube edge length --l and increased the perspective value in order to allow this twisted grid to fit in.

Now comes the fun part! For every cube, we animate its position back and forth along the z axis by half the grid width (we make the translate() a translate3d() and use an additional custom property --z that goes between calc(.5*var(--nc)*var(--l)) and calc(-.5*var(--nc)*var(--l)) ) and its size (via a uniform scale3d() of factor --f that goes between 1 and .1 ). This is pretty much the same thing we did for the square in our original example, except the motion now happens along the z axis, not along the x axis and the scaling happens in 3D, not just in 2D.

$t: 1s;

.cube {
  /* same as before */
  --z: calc(var(--m)*.5*var(--nc)*var(--l));
  transform: rotateY(calc(var(--j)*90deg/var(--nr))) 
             translate3d(var(--x), var(--y), var(--z)) 
             scale3d(var(--f), var(--f), var(--f));
  animation: a $t ease-in-out infinite alternate;
  animation-name: move, zoom;
  animation-duration: $t, .5*$t;
}

@keyframes move { to { --m: -1 } }

@keyframes zoom { to { --f: .1 } }

This doesn’t do anything until we register the multiplier --m and the scaling factor --f to give them a type and an initial value:

CSS.registerProperty({
  name: '--m', 
  syntax: '',
  initialValue: 1
});

CSS.registerProperty({
  name: '--f', 
  syntax: '',
  initialValue: 1
});
The animated grid (
live demo , needs Houdini support).

At this point, all cubes animate at the same time. To make things more interesting, we add a delay that depends on both the column and row index:

animation-delay: calc((var(--i) + var(--j))*#{-2*$t}/(var(--nc) + var(--nr)));
The waving grid effect (
live ).

The final touch is to add a rotation on the 3D assembly:

.a3d {
  top: 50%; left: 50%;
  animation: ry 8s linear infinite;
}

@keyframes ry { to { transform: rotateY(1turn); } }

We also make the faces opaque by giving them a black background and we have the final result:

The final result (
live demo , needs Houdini support).

The performance for this is pretty bad, as it can be seen from the GIF recording above, but it’s still interesting to see how far we can push things.

Hopping Square

I came across the original ina comment to another article and, as soon as I saw the code, I thought it was the perfect candidate for a makeover using some Houdini magic!

Let’s start by understanding what is happening in the original code.

In the HTML, we have nine divs.

Now, this animation is a lot more complex than anything I could ever come up with, but, even so, nine elements seems to be overkill. So let’s take a look at the CSS, see what they’re each used for and see how much we can simplify the code in preparation for switching to the Houdini-powered solution.

Let’s start with the animated elements. The .down and .up elements each have an animation related to moving the square vertically:

/* original */
.down {
  position: relative;
  animation: down $duration ease-in infinite both;

  .up {
    animation: up $duration ease-in-out infinite both;
    /* the rest */
  }
}

@keyframes down {
  0% {
    transform: translateY(-100px);
  }
  20%, 100% {
    transform: translateY(0);
  }
}

@keyframes up {
  0%, 75% {
    transform: translateY(0);
  }
  100% {
    transform: translateY(-100px);
  }
}

With @keyframes and animations on both elements having the same duration, we can pull off a make-one-out-of-two trick.

In the case of the first set of @keyframes , all the action (going from -100px to 0 ) happens in the [0%, 20%] interval, while, in the case of the second one, all the action (going from 0 to -100px ) happens in the [75%, 100%] interval. These two intervals don’t intersect. Because of this and because both animations have the same duration we can add up the translation values at each keyframe.

  • at 0% , we have -100px from the first set of @keyframes and 0 from the second, which gives us -100px
  • at 20% , we have 0 from the first set of @keyframes and 0 from the second (as we have 0 for any frame from 0% to 75% ), which gives us 0
  • at 75% , we have 0 from the first set of @keyframes (as we have 0 for any frame from 20% to 100% ) and 0 from the second, which gives us 0
  • at 100% , we have 0 from the first set of @keyframes and -100px from the second, which gives us -100px

Our new code is as follows. We have removed the animation-fill-mode from the shorthand as it doesn’t do anything in this case since our animation loops infinitely, has a non-zero duration and no delay:

/* new */
.jump {
  position: relative;
  transform: translateY(-100px);
  animation: jump $duration ease-in infinite;
  /* the rest */
}

@keyframes jump {
  20%, 75% { 
    transform: translateY(0);
    animation-timing-function: ease-in-out;
  }
}

Note that we have different timing functions for the two animations, so we need to switch between them in the @keyframes . We still have the same effect, but we got rid of one element and one set of @keyframes .

Next, we do the same thing for the .rotate-in and .rotate-out elements and their @keyframes :

/* original */
.rotate-in {
  animation: rotate-in $duration ease-out infinite both;

  .rotate-out {
    animation: rotate-out $duration ease-in infinite both;
  }
}

@keyframes rotate-in {
  0% {
    transform: rotate(-135deg);
  }
  20%, 100% {
    transform: rotate(0deg);
  }
}

@keyframes rotate-out {
  0%, 80% {
    transform: rotate(0);
  }
  100% {
    transform: rotate(135deg);
  }
}

In a similar manner to the previous case, we add up the rotation values for each keyframe.

  • at 0% , we have -135deg from the first set of @keyframes and 0deg from the second, which gives us -135deg
  • at 20% , we have 0deg from the first set of @keyframes and 0deg from the second (as we have 0deg for any frame from 0% to 80% ), which gives us 0deg
  • at 80% , we have 0deg from the first set of @keyframes (as we have 0deg for any frame from 20% to 100% ) and 0deg from the second, which gives us 0deg
  • at 100% , we have 0deg from the first set of @keyframes and 135deg from the second, which gives us 135deg

This means we can compact things to:

/* new */
.rotate {
  transform: rotate(-135deg);
  animation: rotate $duration ease-out infinite;
}

@keyframes rotate {
  20%, 80% {
    transform: rotate(0deg);
    animation-timing-function: ease-in;
  }
  100% { transform: rotate(135deg); }
}

We only have one element with a scaling transform that distorts our white square:

/* original */
.squeeze {
  transform-origin: 50% 100%;
  animation: squeeze $duration $easing infinite both;
}

@keyframes squeeze {
  0%, 4% {
    transform: scale(1);
  }
  45% {
    transform: scale(1.8, 0.4);
  }
  100% {
    transform: scale(1);
  }
}

There’s not really much we can do here in terms of compacting the code, save for removing the animation-fill-mode and grouping the 100% keyframe with the 0% and 4% ones:

/* new */
.squeeze {
  transform-origin: 50% 100%;
  animation: squeeze $duration $easing infinite;
}

@keyframes squeeze {
  0%, 4%, 100% { transform: scale(1); }
  45% { transform: scale(1.8, .4); }
}

The innermost element ( .square ) is only used to display the white box and has no transform set on it.

/* original */
.square {
  width: 100px;
  height: 100px;
  background: #fff;
}

This means we can get rid of it if we move its styles to its parent element.

/* new */
$d: 6.25em;

.rotate {
  width: $d; height: $d;
  transform: rotate(-135deg);
  background: #fff;
  animation: rotate $duration ease-out infinite;
}

We got rid of three elements so far and our structure has become:

.frame
  .center
    .jump
      .squeeze
        .rotate
    .shadow

The outermost element ( .frame ) serves as a scene or container. This is the big blue square.

/* original */
.frame {
  position: absolute;
  top: 50%;
  left: 50%;
  width: 400px;
  height: 400px;
  margin-top: -200px;
  margin-left: -200px;
  border-radius: 2px;
  box-shadow: 1px 2px 10px 0px rgba(0,0,0,0.2);
  overflow: hidden;
  background: #3498db;
  color: #fff;
  font-family: 'Open Sans', Helvetica, sans-serif;
  -webkit-font-smoothing: antialiased;
  -moz-osx-font-smoothing: grayscale;
}

There’s no text in this demo, so we can get rid of the text-related properties. We can also get rid of the color property since, not only do we not have text anywhere in this demo, but we’re also not using this for any borders, shadows, backgrounds (via currentColor ) and so on.

We can also avoid taking this containing element out of the document flow by using a flexbox layout on the body . This also eliminates the offsets and the margin properties.

/* new */
$s: 4*$d;

body {
  display: flex;
  align-items: center;
  justify-content: center;
  height: 100vh;
}

.frame {
  overflow: hidden;
  position: relative;
  width: $s; height: $s;
  border-radius: 2px;
  box-shadow: 1px 2px 10px rgba(#000, .2);
  background: #3498db;
}

We’ve also tied the dimensions of this element to those of the hopping square.

The .center element is only used for positioning its direct children ( .jump and .shadow ), so we can take it out altogether and use the offsets on it directly on these children.

We use absolute positioning on all .frame descendants. This makes the .jump and .squeeze elements 0x0 boxes, so we tweak the transform-origin for the squeezing transform ( 100% of 0 is always 0 , but the value we want is half the square edge length .5*$d ). We also set a margin of minus half the square edge length ( -.5*$d ) on the .rotate element (to compensate for the translate(-50%, -50%) we had on the removed .center element).

/* new */
.frame * { position: absolute, }

.jump {
  top: $top; left: $left;
  /* same as before */
}

.squeeze {
  transform-origin: 50% .5*$d;
  /* same as before */
}

.rotate {
  margin: -.5*$d;
  /* same as before */
}

Finally, let’s take a look at the .shadow element.

/* original */
.shadow {
  position: absolute;
  z-index: -1;
  bottom: -2px;
  left: -4px;
  right: -4px;
  height: 2px;
  border-radius: 50%;
  background: rgba(0,0,0,0.2);
  box-shadow: 0 0 0px 8px rgba(0,0,0,0.2);
  animation: shadow $duration ease-in-out infinite both;
}

@keyframes shadow {
  0%, 100% {
    transform: scaleX(.5);
  }
  45%, 50% {
    transform: scaleX(1.8);
  }
}

We’re of course removing the position since we’ve already set that for all descendants of the .frame . We can also get rid of the z-index if we move the .shadow before the .jump element in the DOM.

Next, we have the offsets. The midpoint of the shadow is offset by $left (just like the .jump element) horizontally and by $top plus half a square edge length ( .5*$d ) vertically.

We see a height that’s set to 2px . Along the other axis, the width computes to the square’s edge length ( $d ) plus 4px from the left and 4px from the right . That’s plus 8px in total. But one thing we notice is that the box-shadow with an 8px spread and no blur is just an extension of the background . So we can just increase the dimensions of the our element by twice the spread along both axes and get rid of the box-shadow altogether.

Just like in the case of the other elements, we also get rid of the animation-fill-mode from the animation shorthand:

/* new */
.shadow {
  margin: .5*($d - $sh-h) (-.5*$sh-w);
  width: $sh-w; height: $sh-h;
  border-radius: 50%;
  transform: scaleX(.5);
  background: rgba(#000, .2);
  animation: shadow $duration ease-in-out infinite;
}

@keyframes shadow {
  45%, 50% { transform: scaleX(1.8); }
}

We’ve now reduced the code in the original demo by about 40% while still getting the same result.

See the Pen by thebabydino ( @thebabydino ) on CodePen .

Our next step is to merge the .jump , .squeeze and rotate components into one, so that we go from three elements to a single one. Just as a reminder, the relevant styles we have at this point are:

.jump {
  transform: translateY(-100px);
  animation: jump $duration ease-in infinite;
}

.squeeze {
  transform-origin: 50% .5*$d;
  animation: squeeze $duration $easing infinite;
}

.rotate {
  transform: rotate(-135deg);
  animation: rotate $duration ease-out infinite;
}

@keyframes jump {
  20%, 75% { 
    transform: translateY(0);
    animation-timing-function: ease-in-out;
  }
}

@keyframes squeeze {
  0%, 4%, 100% { transform: scale(1); }
  45% { transform: scale(1.8, .4); }
}

@keyframes rotate {
  20%, 80% {
    transform: rotate(0deg);
    animation-timing-function: ease-in;
  }
  100% { transform: rotate(135deg); }
}

The only problem here is that the scaling transform has a transform-origin that’s different from the default 50% 50% . Fortunately, we can go around that.

Any transform with a transform-origin different from the default is equivalent to a transform chain with default transform-origin that first translates the element such that its default transform-origin point (the 50% 50% point in the case of HTML elements and the 0 0 point of the viewBox in the case of SVG elements ) goes to the desired transform-origin , applies the actual transformation we want (scaling, rotation, shearing, a combination of these… doesn’t matter) and then applies the reverse translation (the values for each of the axes of coordinates are multiplied by -1 ).

Any transform with a
transform with a
transform-origin different from the default is equivalent to a chain that translates the point of the default
transform-origin to that of the custom one, performs the desired
transform and then reverses the initial translation (
live demo ).

Putting this into code means that if we have any transform with transform-origin: $x1 $y1 , the following two are equivalent:

/* transform on HTML element with transform-origin != default */

transform-origin: $x1 $y1;
transform: var(--transform); /* can be rotation, scaling, shearing */

/* equivalent transform chain on HTML element with default transform-origin */
transform: translate(calc(#{$x1} - 50%), calc(#{$y1} - 50%))
           var(--transform)
           translate(calc(50% - #{$x1}), calc(50% - $y1);

In our particular case, we have the default transform-origin value along the x axis, so we only need to perform a translation along the y axis. By also replacing the hardcoded values with variables, we get the following transform chain:

transform: translateY(var(--y))
  translateY(.5*$d) scale(var(--fx), var(--fy)) translateY(-.5*$d)
  rotate(var(--az));

We can compact this a bit by joining the first two translations:

transform: translateY(calc(var(--y) + #{.5*$d}))
  scale(var(--fx), var(--fy)) translateY(-.5*$d)
  rotate(var(--az));

We also put the three animations on the three elements into just one:

animation: jump $duration ease-in infinite, 
  squeeze $duration $easing infinite, 
  rotate $duration ease-out infinite;

And we modify the @keyframes so that we now animate the newly-introduced custom properties --y , --fx , --fy and --az :

@keyframes jump {
  20%, 75% { 
    --y: 0;
    animation-timing-function: ease-in-out;
  }
}

@keyframes squeeze {
  0%, 4%, 100% { --fx: 1; --fy: 1 }
  45% { --fx: 1.8; --fy: .4 }
}

@keyframes rotate {
  20%, 80% {
    --az: 0deg;
    animation-timing-function: ease-in;
  }
  100% { --az: 135deg }
}

However, this won’t work unless we register these CSS variables we have introduced and want to animate:

CSS.registerProperty({
  'name': '--y', 
  'syntax': '',
  'initialValue': '-100px'
});

CSS.registerProperty({
  'name': '--fx', 
  'syntax': '',
  'initialValue': 1
});

/* exactly the same for --fy */

CSS.registerProperty({
  'name': '--az', 
  'syntax': '',
  'initialValue': '-135deg'
});

We now have a working demo of the method animating CSS variables. But given that our structure is now one wrapper with two children, we can reduce it further to one element and two pseudo-elements, thus getting the final version which can be seen below. It’s worth noting that this only works in Blink browsers with the Experimental Web Platform features flag enabled.

The final result (
live , needs Houdini support)

您可能感兴趣的

CodePen Chicago: April 23rd, 2018 @ Shiftgig Educational Edition Featuring education was a suggestion byArelia and it was a great idea so during the event we highlighted CodePen's pedagogic...
How do I change the background color of a button w... I researched a lot, and I found this JSFiddle looks like what I need, but, when I click the button, the page background is changing. I want the...
Maximum width CSS, reactive design I'm working on my friends website to make it mobile friendly. He doesn't want a new site just to limit certain elements of the site for mobile users. ...
Mofei作品@2017 – 世间本无其他,都是奇迹... 持续高潮的2017过去了。今年的基调起的格外的高,一上来就是3月的新西兰自驾之旅,然后5、6月的婚礼、老家的新房也交房了,接下来的8、9月和一起奋斗的小伙伴们去了趟泰国,最后又假装去了趟贝加尔湖。如此之high,以至于到了2018元旦这个最佳年度总结时间,刷着充满“再见2017”的朋友圈,也只能计划...
CSS原理解析之模型篇 写在前面: 尝试回答几个问题: 什么是盒模型,控制盒模型的属性有哪些? Margin、Padding、Border、Width、Height这些属性改变/影响盒模型,但每个属性都会在所有元素上生效么? 如果存在区别,那么和元素类型或者元素定位有关系么? ...
CSS-Tricks责编内容来自:CSS-Tricks (源链) | 更多关于

阅读提示:酷辣虫无法对本内容的真实性提供任何保证,请自行验证并承担相关的风险与后果!
本站遵循[CC BY-NC-SA 4.0]。如您有版权、意见投诉等问题,请通过eMail联系我们处理。
酷辣虫 » What Houdini Means for Animating Transforms



专业 x 专注 x 聚合 x 分享 CC BY-NC-SA 4.0

使用声明 | 英豪名录