The new Domain Generation Algorithm of Nymaim


The new Domain Generation Algorithm of Nymaim

The Nymaim malware first appeared in 2013. It is mainly used as a downloader for other malware such as ransomware, but it later also started manipulating search results for click fraud .

Many great articles have been published on Nymaim, including its DGA, maybe because the malware used an effective and interesting obfuscation. The obfuscation lead to many imaginative tools to aid analysis of the malware, for example by the GovCERT.CH or the CERT Polska .

Apart from the obfuscation, Nymaim is interesting because it tries to protect itself against sinkholing by adding a checksum to the A resource records, and by transforming the IP addresses before using them, see “Nymaim revisited” by the CERT Polska , “Threat Spotlight: GozNym” by Talos and “Nymaim Origins, Revival and Reversing Tales” by Alberto Ortega .

This month a new version of Nymaim appeared with a few modifications to the above mentioned features:

  • The obfuscation has been dropped entirely, apart from using a packer. On the contrary, the malware even uses helpful logging messages and a configuration with descriptive names.

  • The IP transformation has been slightly changed, using different constants, but otherwise sticking to the same procedure as before.

  • The DGA has been completely rewritten. It is now based on wordlists, like the DGA of Matsnu , Suppobox , or the close relative to Nymaim, Gozi .

  • Apart from the DGA, Nymaim also has a list of hard-coded domains that follow the same pattern as the DGA domains, but which are tried before the time-dependent DGA domains.

This blog post focuses on the DGA and the IP transformation aspect of Nymaim. For example, these are the first ten domains for April 27, 2018:

I analyzed the following sample from Virustotal:

MD5 30bce8f7ac249057809d3ff1894097e7
SHA-256 73f06bed13e22c2ab8b41bde5fc32b6d91680e87d0f57b3563c629ee3c479e73
SHA-1 b629c20b4ef0fd31c8d36292a48aa3a8fbfdf09c
Filesize 484 KB
Compile Timestamp 2010-06-13 18:50:03 ( very likely faked )
First Submission to Virustotal 2018-04-17 21:49:18
Virustotal Link link

I unpacked it to the following executable. All screenshots are take from this sample loaded at address 0x400000:

MD5 379ba8e55498cb7a71ec4dcd371968af
SHA-256 3eb9bbe3ed251ec3fd1ff9dbcbe4dd1a2190294a84ee359d5e87804317bac895
SHA-1 5f522dda6b003b151ff60b83fe326400b9ed7716
Filesize 368 KB
Compile Timestamp 2018-03-02 23:12:20
First Submission to Virustotal 2018-04-26 12:19:41 ( by me )
Virustotal Link link


This Section describes the details of the DGA. If you are only interested in a Python reimplementation, please refer to Section.


The new DGA of Nymaim is seeded with three values:

  1. A hard-coded, 32 character upper-case hexadecimal string, presumably a MD5 hash ( 3138C81ED54AD5F8E905555A6623C9C9 in the analyzed sample). Nymaim calls this string GenerationKey .
  2. The zero-based day of the year. For example, January 1 st is 0. This value is lower by one than the ISO definition, which defines January 1 st as day 1 of the year. From this value a counter is subtracted, which starts at 0 and counts up to DayDelta (10 in the sample). This means the DGA will revisit domains from up to 10 days into the past if necessary (except at the turn of year, see).
  3. The last two digits of the current year.

These three values are concatenated into a string. This string is then MD5-hashed, with the result represented as a lower-case hexadecimal string. Please note that this is in contrast to the GenerationKey , which is all upper-case. The resulting string is the seed and basis for the ensuing pseudo-random number generations.

Pseudo-Random Number Generator

The pseudo-random number generator (PRNG) uses the first 8 characters of the MD5 hash string and takes it as a big-endian hexadecimal representation of a 32-bit integer, which is the random number. The first 7 characters of the MD5 hash are discarded, and the rest is again hashed with MD5 and represented as a lower-case hexadecimal string. The first 8 characters from this string represent the next pseudo-random value. See the following illustration for the seeding procedure and the PRNG:


The DGA uses four random values to pick strings from four lists:

  1. A word from a first word list.
  2. A separator character.
  3. A word from a second word list.
  4. A top level domain.

The four strings are then concatenated to form the domain. The words are chosen by using the remainder of dividing the random value by the length of the list to be picked from as the index into the list:

CString *__thiscall dga(_DWORD *config, CString *szDomainName)
  dgaconfig *cfg; // esi@1
  int v3; // eax@2
  unsigned int nNumberOfFirstWords; // ecx@3
  randnrs objRandNrs; // [esp+Ch] [ebp-2Ch]@1
  int dgb2; // [esp+20h] [ebp-18h]@1
  int nr_random_values; // [esp+24h] [ebp-14h]@1
  char cstrDomainName; // [esp+28h] [ebp-10h]@3
  int dbg; // [esp+34h] [ebp-4h]@1

  dgb2 = 0;
  cfg = config;
  objRandNrs.self = &GetRuntimeClass;
  nr_random_values = 4;
  dbg = 1;
    v3 = rand_0(&cfg->random_hash);
    store_rand(objRandNrs.field_8, v3);
  while ( nr_random_values );
  nNumberOfFirstWords = cfg->nNumberOfFirstWords;
  LOBYTE(dbg) = 2;
  CString::operator+=(&cstrDomainName, cfg->rgFirstWords + 4 * (*objRandNrs.r % nNumberOfFirstWords));
  CString::operator+=(&cstrDomainName, cfg->rgSeparators + 4 * (*(objRandNrs.r + 4) % cfg->nNumberOfSeparators));
  CString::operator+=(&cstrDomainName, cfg->rgSecondWords + 4 * (*(objRandNrs.r + 8) % cfg->nNumberOfSecondWords));
  CString::operator+=(&cstrDomainName, cfg->rgTLDs + 4 * (*(objRandNrs.r + 12) % cfg->nNumberOfTLDs));
  CString::CString(szDomainName, &cstrDomainName);
  dgb2 = 1;
  LOBYTE(dbg) = 1;
  LOBYTE(dbg) = 0;
  return szDomainName;

The first word list contains 2450 words that start with letters R to Z. The shortest have four letters, the longest has 18 ( telecommunications ):


There are only two separators: the zero length string and the hyphen - . The third word list contains 4387 words starting with letters C to R. The last word is reached , which is probably the word just before the start of the first word list beginning with reaches . The shortest words have four letters, the longest have 18 (e.g., pharmaceuticals ):


Finally, there are 74 top level domains. The tld .com appears four times and .net appears three times, which increases the likelihood that .com or .net are picked. The full list of TLDs is: .com , .com , .com , .net , .net , .net , .ac , .ad , .at , .am , .az , .be , .biz , .bt , .by , .cc , .ch , .cm , .cn , .co , .com , .cx , .cz , .de , .dk , .ec , .eu , .gs , .hn , .ht , .id , .in , .info , .it , .jp , .ki , .kr , .kz , .la , .li , .lk , .lv , .me , .mo , .mv , .mx , .name , .net , .nu , .org , .ph , .pk , .pl , .pro , .ps , .re , .ru , .sc , .sg , .sh , .su , .tel , .tf , .tj , .tk , .tm , .top , .uz , .vn , .win , .ws , .wtf , .xyz , .yt .

Sliding Window

The DGA generates MaxDomainsForTry domains per day, which for the analysed sample is 64. After those 64 domains, the PRNG is reseeded with the seed from the previous day, by subtracting 1 from the day of the year. This way, up to 64*(10+1) = 704 domains are generated:

At the turn of the year, when the day of the year is smaller than the DayDelta , the offset day can become negative. For example, on January 3rd the sliding window leads to day of year values of 2, 1, 0,-1, …, -8. The negative value lead to new set of domains.

Hard-Coded Domains

Nymaim has a list of 46 hard-coded domains that follow the DGA pattern of two words separated by an optional hyphen. These domains are all with the .com TLD. The hard-coded domains are always tested first, before any DGA domains are calculated. For the sample at hand, the hard-coded domains are:

Nameserver Test

A distinctive feature of Nymaim is the DNS query for the name server record (NS). Nymaim checks if any of the answers contains a word from a list it calls BlackNsWords . These words are related to sinkholing:


If Nymaim finds any of those word in the NS resource record, it will not use the domain.

Preferred DNS Servers

Nymaim uses a list of dns servers called PreferredDnsServers , presumably because these are less likely to alter or block DNS requests.

IP Company Google Google Neustar Security Neustar Security OpenDNS OpenDNS


Like the earlier version of Nymaim, the A resource records are not the C2 IPs. The real addresses are obtained by transforming the IPs with a sequence of easily reversible XOR and substraction steps. Talos intelligence wrote a detailed report in September 2017 that describes the algorithms.

The following graph view snippet shows the transformation of an IP:

A Python script to perform the IP transformation in both directions can be found at theend of this blog post.

Checksum Test

Nymaim also still uses the checksum test of A resource records. For example, here are the IPs for a C2 domain that was operational at the time of writing:

> dig @ +short A

The following table lists these four IPs (first column) and the transformed, real IP (second column). The third column shows the integer representation:

IP IP’ value 0x0000007F 0x0100007F 0x29742AC0 0x2A742BBE

Nymaim will check all integer values to see if they are the sum of the remaining values. In the above example, the bold “IP” is the result of transforming the A RR It has a little endian integer representation of 0x2A742BBE. This corresponds to the checksum obtained by adding up the integer representation of the remaining IPs, i.e.,0x2A742BBE = 0x0000007F + 0x0100007F + 0x29742AC0.

The IP that matches the checksum is removed from the list, it only serves as the checksum for the other IPs. Nymaim will then one after another test the transformed IPs:

  1. A DNS request for the NS resource of is made to check for signs of a sinkhole. The response does not contain one of the BlackNsWords and Nymaim proceeds to query the A records.
  2. The DNS request for the A records returns four transformed IPs. Because the fourth IP is a checksum for the remaining three IPs, Nymaim goes on to contact the IPs in order.
  3. The first non local IP address,, is contacted with an HTTP POST requests to .


The actual C2 requests are HTTP POSTs. The content is AES encrypted with a session key, which is protected with asymmetric encryption. The first C2 requests are around 900 bytes. The URL filename is hard-coded to index.php :


The following tables summarizes the properties of the Nymaim DGA.

property value
type TDD (time-dependent-deterministic)
generation scheme MD5 based PRNG
seed generation key + current date
domain change frequency daily, with a 11 day sliding window
domains per day 46 hardcoded domains + 64 new DGA domains + 640 old DGA domains
sequence sequential
wait time between domains None
top level domains 69 different domains, .com and .net favored
second level characters two words from wordlists with optional hyphen as separator
second level domain length 8 (e.g., ) – 34 (e.g., )


In this section you find a Python reimplementation of the DGA, and a script for the IP transformation of Nymaim. Please also refer to the Github page for current versions of the scripts.


The DGA needs the large wordlistswords.json, place it in the same directory as the DGA script. You can generate the domains for a specific day with -d or --date , for example:

> python -d 2018-04-27

import json
import argparse
from datetime import datetime
import hashlib

class Rand:

    def __init__(self, seed, year, yday, offset=0):
        m = self.md5(seed)
        s = "{}{}{}".format(m, year, yday + offset)
        self.hashstring = self.md5(s)

    def md5(s):
        return hashlib.md5(s.encode('ascii')).hexdigest()

    def getval(self):
        v = int(self.hashstring[:8], 16)
        self.hashstring = self.md5(self.hashstring[7:])
        return v

def dga(date):
    with open("words.json", "r") as r:
        wt = json.load(r)

    seed = "3138C81ED54AD5F8E905555A6623C9C9"
    daydelta = 10
    maxdomainsfortry = 64
    year = date.year % 100
    yday = date.timetuple().tm_yday - 1

    for dayoffset in range(daydelta + 1):
        r = Rand(seed, year, yday - dayoffset)
        for _ in range(maxdomainsfortry):
            domain = ""
            for s in ['firstword', 'separator', 'secondword', 'tld']:
                ss = wt[s]
                domain += ss[r.getval() % len(ss)]

if __name__=="__main__":
    parser = argparse.ArgumentParser()
    parser.add_argument("-d", "--date", help="as YYYY-mm-dd")
    args = parser.parse_args()
    date_str =
    if date_str:
        date = datetime.strptime(date_str, "%Y-%m-%d")
        date = 

IP Transformation Script

The following Python script can be used to transform Nymaim IP addresses in both directions, and to see if a list of IP addresses fulfills the checksum requirement:

import argparse

def iptoval(ip):
    els = [int(_) for _ in ip.split(".")]
    v = 0
    for el in els[::-1]:
        v <>= 8
    return ".".join(els)

def step(ip, reverse=False):
    v = iptoval(ip)
    if reverse:
        v ^= 0x18482642
        v = (v + 0x78643587) & 0xFFFFFFFF
        v ^= 0x87568289
        v ^= 0x87568289
        v = (v - 0x78643587) & 0xFFFFFFFF
        v ^= 0x18482642
    return valtoip(v)

def transform(ip, iterations=16, reverse=False):
    for _ in range(iterations):
        ip = step(ip, reverse=reverse)
    return ip

def checksum(pairs, index):
    checksum = 0
    for i, p in enumerate(pairs):
        if i == index:
        checksum += iptoval(p[1])
    return checksum & 0xFFFFFFFF

def findip(pairs):
    for i, p in enumerate(pairs):
        c = checksum(pairs, i)
        if c == iptoval(p[1]):
            return p[0]

if __name__ == "__main__":
    parser = argparse.ArgumentParser()
    parser.add_argument("ip", nargs="+")
    parser.add_argument("-r", "--reverse", help="reverse transformation",
    parser.add_argument("-c", "--checksum", help="test checksum",
    args = parser.parse_args()

    pairs = []
    for ip_src in args.ip:
        ip_dst = transform(ip_src, reverse=args.reverse)
        pair = (ip_src, ip_dst)
        d = "-->"
        if args.reverse:
            pair = pair[::-1]
            d = "<--"
        if not args.checksum:
            print("{} {} {}".format(ip_src, d, ip_dst))

    fmt = "| {:4} | {:15} | {:15} | {:10} |"
    fmt2 = "| {:4} | {:15} | {:15} | 0x{:08X} |"
    if args.checksum:
        print(fmt.format("", "IP", "IP'", "value"))
        print(fmt.format(*4 * ["---"]))
        ok_ip = findip(pairs)

        for ip, ipp in pairs:
            if ip == ok_ip:
            print(fmt2.format("", ip, ipp, iptoval(ipp)))

        for ip, ipp in pairs:
            if ip != ok_ip:
            print(fmt2.format("x", ip, ipp, iptoval(ipp)))

        if not ok_ip:
            print("No IP matches checksum")
            print("The IP marked x matches the checksum of remaining IPs, "
                  "it is removed.")

For example, one of the A RR of is The real IP can be found with:

> python3 -->

To reverse the transformation, use -r or --reverse :

> python3 --reverse <--

To check if the A resource records satisfy the checksum, add all IPs as arguments and add -c or --checksum :

> python3 --checksum
|      | IP              | IP'             | value      |
| ---  | ---             | ---             | ---        |
|      |    |       | 0x0000007F |
|      |    |       | 0x0100007F |
|      |  |   | 0x29742AC0 |
| x    |   |   | 0x2A742BBE |
The IP marked x matches the checksum of remaining IPs, it is removed.

If an IP matches the checksum, it is marked with an x .



Music industry insiders say Google doesn't stand a chance against Spotify and Apple in stre...



The new Domain Generation Algorithm of Nymaim